Armed with the Banshee wiring diagram, I set out to rewire the old girl and in the process, remove all the connectors I wasn't using since I'd ditched the TORS system back in 1990. I also wanted to tuck the harness up against the frame rails instead of running it down the center of the frame under the gas tank. I never liked that big mess in there because it made changing plugs harder than it had to be. Unfortunately, as I worked, it soon became clear the length of the factory harness was several inches too short to accomplish what I wanted. Luckily, I was working on a job (I'm a C-7 Contractor) where the electricians had bazillions of small spools of wire and I was able to get several feet of the various colors/guages I needed to modify the harness.